radio technology

print Print
Please select which sections you would like to print:
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

radio technology, transmission and detection of communication signals consisting of electromagnetic waves that travel through the air in a straight line or by reflection from the ionosphere or from a communications satellite.

Basic physical principles

Electromagnetic radiation includes light as well as radio waves, and the two have many properties in common. Both are propagated through space in approximately straight lines at a velocity of about 300,000,000 metres (186,000 miles) per second and have amplitudes that vary cyclically with time; that is, they oscillate from zero amplitude to a maximum and back again. The number of times the cycle is repeated in one second is called the frequency (symbolized as f ) in cycles per second, and the time taken to complete one cycle is 1/f seconds, sometimes called the period. To commemorate the German pioneer Heinrich Hertz, who carried out some of the early radio experiments, the cycle per second is now called a hertz so that a frequency of one cycle per second is written as one hertz (abbreviated Hz). Higher frequencies are abbreviated as shown in Table 3.

Frequency terms and their abbreviations
term cycles per second abbreviation equivalent
1 hertz 1 1 Hz
1 kilohertz 1,000 1 kHz 1,000 Hz
1 megahertz 1,000,000 (106) 1 MHz 1,000 kHz
1 gigahertz 1,000,000,000 (109) 1 GHz 1,000 MHz

A radio wave being propagated through space will at any given instant have an amplitude variation along its direction of travel similar to that of its time variation, much like a wave traveling on a body of water. The distance from one wave crest to the next is known as the wavelength.

Wavelength and frequency are related. Dividing the speed of the electromagnetic wave (c) by the wavelength (designated by the Greek letter lambda, λ) gives the frequency: f = c/λ. Thus a wavelength of 10 metres has a frequency of 300,000,000 divided by 10, or 30,000,000 hertz (30 megahertz). The wavelength of light is much shorter than that of a radio wave. At the centre of the light spectrum the wavelength is about 0.5 micron (0.0000005 metre), or a frequency of 6 × 1014 hertz or 600,000 gigahertz (one gigahertz equals 1,000,000,000 hertz). The maximum frequency in the radio spectrum is usually taken to be about 45 gigahertz, corresponding to a wavelength of about 6.7 millimetres. Radio waves can be generated and used at frequencies lower than 10 kilohertz (λ = 30,000 metres).

Mechanism of wave propagation

A radio wave is made up of electric and magnetic fields vibrating mutually at right angles to each other in space. When these two fields are operating synchronously in time, they are said to be in time phase; i.e., both reach their maxima and minima together and both go through zero together. As the distance from the source of energy increases, the area over which the electric and magnetic energy is spread is increased, so that the available energy per unit area is decreased. Radio signal intensity, like light intensity, decreases as the distance from the source increases.

A transmitting antenna is a device that projects the radio-frequency energy generated by a transmitter into space. The antenna can be designed to concentrate the radio energy into a beam like a searchlight and so increase its effectiveness in a given direction (see electronics).

Frequency bands

The radio-frequency spectrum is divided arbitrarily into a number of bands from very low frequencies to superhigh frequencies (see Table 4). Sections of the spectrum have been allocated to the various users (see Click Here to see full-size tableTable 5: Utilization of Radio-Frequency SpectrumTable 5), such as telegraph, telephonic speech, telemetry, and radio and television broadcasting.

Get Unlimited Access
Try Britannica Premium for free and discover more.
Frequency band designations
frequency designation frequency range wavelength range
*Also called shortwaves.
very low frequencies (VLF) 3–30 kilohertz 100,000–10,000 m
low frequencies (LF) 30–300 kilohertz 10,000–1,000 m
medium frequencies (MF) 300–3,000 kilohertz 1,000–100 m
high frequencies (HF)* 3–30 megahertz 100–10 m
very high frequencies (VHF) 30–300 megahertz 10–1 m
ultrahigh frequencies (UHF) 300–3,000 megahertz 1 m–10 cm
superhigh frequencies (SHF) 3–30 gigahertz 10–1 cm

The radio-frequency bandwidth is the range of frequencies covered by the modulated radio-frequency signal. The information carried by the signal has a certain bandwidth associated with it, and the carrier must have a channel width at least as great as the information bandwidth. For regular amplitude-modulated (AM) broadcasting the radio-frequency bandwidth must be twice the information-frequency bandwidth. Teleprinter and telex operation requires only a small bandwidth, on the order of 200 hertz, depending on the maximum speed of the pulses forming the information code. Telephonic speech must have high intelligibility, but naturalness (high fidelity) is not of great importance. Tests have shown that the main components of speech lie between about 300 and 3,500 hertz, and telephonic channels carried by radio are therefore normally confined to a bandwidth of about four kilohertz. The smaller the information bandwidth employed, the more speech channels can be carried in a given carrier bandwidth and the more economical the system will be.

Young people can hear audio frequencies ranging from about 30 hertz to 18 kilohertz, but, as they grow older, hearing ranges from about 100 hertz to 10 kilohertz. For high-quality (high-fidelity) reproduction of voice or speech, the range should be not less than about 30 hertz (the lowest frequency of a large organ pipe) to 15 kilohertz (piccolo, cymbal, triangle). Acceptable audio quality under certain circumstances may be achieved with a bandwidth as small as five kilohertz, as in AM radio; a much larger bandwidth is needed for transmitting a moving picture because it is necessary to convey the overall average light content of a picture as well as the picture detail. The average light content requires frequencies as low as 20 hertz to be transmitted, and picture detail demands frequencies up to five megahertz for a standard television picture.