lock

lock, mechanical device for securing a door or receptacle so that it cannot be opened except by a key or by a series of manipulations that can be carried out only by a person knowing the secret or code.

Early history.

The lock originated in the Near East; the oldest known example was found in the ruins of the palace of Khorsabad near Nineveh. Possibly 4,000 years old, it is of the type known as a pin tumbler or, from its widespread use in Egypt, an Egyptian lock. It consists of a large wooden bolt, which secures the door, through which is pierced a slot with several holes in its upper surface. An assembly attached to the door contains several wooden pins positioned to drop into these holes and grip the bolt. The key is a large wooden bar, something like a toothbrush in shape; instead of bristles it has upright pegs that match the holes and the pins. Inserted in the large keyhole below the vertical pins it is simply lifted, raising the pins clear and allowing the bolt, with the key in it, to be slid back (Figure 1). Locks of this type have been found in Japan, Norway, and the Faeroe Islands and are still in use in Egypt, India, and Zanzibar. An Old Testament reference, in Isaiah, “And I will place on his shoulder the key of the house of David,” shows how the keys were carried. The falling-pin principle, a basic feature of many locks, was developed to the full in the modern Yale lock (Figure 2).

In a much more primitive device used by the Greeks, the bolt was moved by a sickle-shaped key of iron, often with an elaborately carved wooden handle. The key was passed through a hole in the door and turned, the point of the sickle engaging the bolt and drawing it back. Such a device could give but little security. The Romans introduced metal for locks, usually iron for the lock itself and often bronze for the key (with the result that keys are found more often today than locks). The Romans invented wards—i.e., projections around the keyhole, inside the lock, which prevent the key from being rotated unless the flat face of the key (its bit) has slots cut in it in such a fashion that the projections pass through the slots. For centuries locks depended on the use of wards for security, and enormous ingenuity was employed in designing them and in cutting the keys so as to make the lock secure against any but the right key (Figure 3). Such warded locks have always been comparatively easy to pick, since instruments can be made that clear the projections, no matter how complex. The Romans were the first to make small keys for locks—some so small that they could be worn on the fingers as rings. They also invented the padlock, which is found throughout the Near and Far East, where it was probably independently invented by the Chinese.

In the Middle Ages, great skill and a high degree of workmanship were employed in making metal locks, especially by the German metalworkers of Nürnberg. The moving parts of the locks were closely fitted and finished, and the exteriors were lavishly decorated. Even the keys were often virtual works of art. The security, however, was solely dependent on elaborate warding, the mechanism of the lock being developed hardly at all. One refinement was to conceal the keyhole by secret shutters, another was to provide blind keyholes, which forced the lock picker to waste time and effort. The 18th-century French excelled in making beautiful and intricate locks.

Development of modern types.

The first serious attempt to improve the security of the lock was made in 1778 when Robert Barron, in England, patented a double-acting tumbler lock. A tumbler is a lever, or pawl, that falls into a slot in the bolt and prevents it being moved until it is raised by the key to exactly the right height out of the slot; the key then slides the bolt. The Barron lock (see Figure 4) had two tumblers and the key had to raise each tumbler by a different amount before the bolts could be shot. This enormous advance in lock design remains the basic principle of all lever locks.

But even the Barron lock offered little resistance to the determined lock picker, and in 1818 Jeremiah Chubb of Portsmouth, Eng., improved on the tumbler lock by incorporating a detector, a retaining spring that caught and held any tumbler which, in the course of picking, had been raised too high. This alone prevented the bolt from being withdrawn and also showed that the lock had been tampered with.

In 1784 (between Barron’s lock and Chubb’s improvements on it) a remarkable lock was patented in England by Joseph Bramah. Working on an entirely different principle, it used a very small light key, yet gave an unprecedented amount of security. Bramah’s locks are very intricate (hence, expensive to make), and for their manufacture Bramah and his young assistant Henry Maudslay (later to become a famous engineer) constructed a series of machines to produce the parts mechanically. These were among the first machine tools designed for mass production. The Bramah key is a small metal tube that has narrow longitudinal slots cut in its end. When the key is pushed into the lock, it depresses a number of slides, each to the depth controlled by the slots. Only when all the slides are depressed to exactly the right distance can the key be turned and the bolt thrown (Figure 5). So confident was Bramah of the security of his lock that he exhibited one in his London shop and offered a reward of £200 to the first person who could open it. For more than 50 years it remained unpicked, until 1851 when a skilled American locksmith, A.C. Hobbs, succeeded and claimed the reward.

Get Unlimited Access

Try Britannica Premium for free and discover more.

Subscribe

The lock industry was in its heyday in the mid-19th century. With the rapidly expanding economy that followed the Industrial Revolution, the demand for locks grew tremendously.

In this period lock patents came thick and fast. All incorporated ingenious variations on the lever or Bramah principles. The most interesting was Robert Newell’s Parautoptic lock, made by the firm of Day and Newell of New York City. Its special feature was that not only did it have two sets of lever tumblers, the first working on the second, but it also incorporated a plate that revolved with the key and prevented the inspection of the interior, an important step in thwarting the lock picker. It also had a key with interchangeable bits so that the key could be readily altered. Newell displayed an example in London in the Great Exhibition of 1851. Despite many attempts, there is no record that it has ever been picked.

In 1848 a far-reaching contribution was made by an American, Linus Yale, who patented a pin tumbler lock working on an adaptation of the ancient Egyptian principle. In the 1860s his son Linus Yale, Jr., evolved the Yale cylinder lock, with its small, flat key with serrated edge, now probably the most familiar lock and key in the world. Pins in the cylinder are raised to the proper heights by the serrations, making it possible to turn the cylinder. The number of combinations of heights of the pins (usually five), coupled with the warding effect of the crooked key and keyhole, give an almost unlimited number of variations (see Figure 2). It has come to be almost universally used for outside doors of buildings and automobile doors, although in the 1960s there was a trend toward supplementing it on house doors with the sturdy lever lock.

In the 1870s a new criminal technique swept the United States: robbers seized bank cashiers and forced them to yield keys or combinations to safes and vaults. To combat this type of crime, James Sargent of Rochester, N.Y., in 1873 devised a lock based on a principle patented earlier in Scotland, incorporating a clock that permitted the safe to be opened only at a preset time.

The keyless combination (see Figure 6) lock derives from the “letter-lock,” in use in England at the beginning of the 17th century. In it a number of rings (inscribed with letters or numbers) are threaded on a spindle; when the rings are turned so that a particular word or number is formed, the spindle can be drawn out because slots inside the rings all fall in line. Originally, these letter locks were used only for padlocks and trick boxes. In the last half of the 19th century, as developed for safes and strong-room doors, they proved to be the most secure form of closure. The number of possible combinations of letters or numbers is almost infinite and they have no keyholes into which an explosive charge can be placed. Furthermore, they are easy to manufacture.

A simple combination lock with four rings (tumblers, in the U.S.) and 100 numbers on the dial (i.e., 100 positions for each ring) presents 100,000,000 possible combinations. Figure 6 shows how the single knob can set all the wheels; in this case the lock has three rings, or wheels, giving 1,000,000 possible combinations. If, for example, the combination is 48, 15, 90, the knob is turned counterclockwise until the 48 comes opposite the arrow for the fourth time, a process that ensures that there is no play between the other wheels. The slot on the first wheel (on the left in the diagram) is then in the correct position for opening and it will not move in subsequent operations. The knob is then turned clockwise until the 15 is opposite the arrow for the third time; this sets the slot of the middle wheel in line with the first. Finally, the knob is turned counterclockwise to bring the 90 for the second time to the arrow. All three slots are then in line and a handle can be turned to withdraw the bolts. The combination can easily be changed, for the serrations shown on each wheel enable the slot to be set to a different position relative to the stud for that wheel.

It is frequently necessary, particularly in hotels and office buildings, for a manager or caretaker to have a master key that will open all the locks in the building. To design a set of single locks each of which can be opened by its own key, and also by the master key, requires a coordinated arrangement of the warding. The master key is so shaped as to avoid the wards of all the locks. Another method involves two keyholes, one for the normal key, the other for the master key, or two sets of tumblers or levers, or in the case of Yale locks, two concentric cylinders.