Boat lifts
- Related Topics:
- lock
- barge
- towpath
- mitre gate
- lock gate
Vessels can be transported floating in a steel tank or caisson between adjacent pounds by a vertical lift, replacing several locks. Vertical lifts can be operated by high-pressure hydraulic rams, by submersible floats, or by geared counterweights. Hydraulic lifts with twin caissons were constructed in 1875 at Anderton, England, for 60-ton vessels; in 1888 lifts were constructed at Les Fontinettes, France, for 300-ton vessels and at La Louvière, Belgium, for 400-ton vessels. Similar hydraulic lift locks were constructed at Kirkfield and Peterborough in Ontario, Canada; the latter, completed in 1904, has a lift of nearly 20 metres (65 feet). Float lifts were constructed in 1899 at Henrichenburg, Germany, for 600-ton vessels and in 1938 at Magdeburg, Germany, for 1,000-ton vessels, and in 1962 a lift at Henrichenburg could accommodate 1,350-ton vessels.
Counterweighted lifts were introduced in 1908 when the Anderton lift was reconstructed. Each caisson was separately counterbalanced by a series of weights and ropes with electrically driven gearing. This method was used in 1932 at Niederfinow, Germany, for 1,000-ton vessels.
Inclined planes
In the 18th century, inclined planes were constructed to transport small boats on trucks between adjacent pounds, using animal power and gravity and, later, steam. A series of planes was built in the United States on the canal between the Delaware and Hudson rivers to transport 80-ton vessels in caissons; a similar plane for 60-ton vessels was built at Foxton, England, to bypass 10 locks.
Three planes have been constructed in Europe, at Ronquières, Belgium, for 1,350-ton vessels; at Saint-Louis-Arzviller, France, for 300-ton vessels; and at Krasnoyarsk, Russia, for 1,500-ton vessels. At Ronquières and Krasnoyarsk, vessels are carried longitudinally up relatively gentle inclines with gradients of 1 in 21 and 1 in 12, respectively, while at Arzviller the site permitted only a steep gradient of 1 in 2.5, necessitating vessels being moved transversely. At Ronquières the plane rises 67 metres (220 feet) and replaces 17 locks; at Arzviller the rise is 46 metres (150 feet), and here too 17 locks have been replaced. At Krasnoyarsk the plane rises 100.5 metres (330 feet) from the downstream water level of the Yenisey River to surmount the hydroelectric dam; on top of the dam the caisson moves on to a turntable, where it is rotated through 38° before passing to a second plane running down to the water level impounded upstream of the dam.
Inland waterway craft
While early navigation of natural rivers was dependent on the use of sail for upstream operation, towpaths and animal haulage were provided when rivers were canalized and artificial canals constructed. Later, mechanical haulage was developed and is still used for local movement of unpowered craft.
Steam, and later diesel, tugs improved speed of travel, particularly where lakes or estuarial lengths were encountered. Powered barges, towing one or more unpowered (dumb) barges, were introduced on rivers with adequate lock chambers, but on artificial canals double (or treble) lockage operations made this method uneconomical, and, except for local lighterage (loading, transporting, and unloading) or maintenance duties, dumb barges are little used on artificial canals.
To meet competition from road haulage, with its greater flexibility and higher speeds, water transport must find its solution in its capacity for larger units, thus necessitating the enlargement of channels and locks. Consequently, the 300-ton barges operating economically early in the 20th century have been replaced by craft as large as 1,350 tons and more.
In North America, transport operators grouped dumb barges into assemblies, lashing them on either side or ahead of a power unit with similar barges secured in rows ahead. These assemblies of unpowered and individually unmanned barges are known, somewhat illogically, as push tows, and the power unit as a push tug. While these assemblies operate most advantageously on natural rivers, their development has justified heavy capital expenditure for enlarging lock chambers on some canalized rivers to avoid delays and increased operational costs arising from multiple lockage. In Europe, push tows normally operate with fewer than six barges, but on the Mississippi River, with its deep channel and 1,127 km (700 miles) without a lock, a push tow may aggregate 40,000 tons, an assembly of 40 barges being controlled by one 9,000-horsepower push tug, with cabins and facilities for 24-hour operation. On the Ohio River the original 600-foot lock chambers were lengthened to 366 metres (1,200 feet) to obviate double lockage.
Movement of push tows around bends, as on the Moselle River, is facilitated by portable power units attached to the bows and operated as required. Similar units can be attached to individual barges for transfer from push tow to wharf or vice versa; they can also be used for handling dumb barges in docks and for moving hopper barges short distances from dredger to disposal site.
Waterway maintenance
Inspection vessels, self-propelled and equipped with echo-sounding appliances, are necessary for regular survey of the waterway. On natural and canalized rivers, which are subject to droughts and floods, attention is particularly directed to the location of the navigable channel: transverse soundings reveal channel movements and enable marker buoys or perches to be relocated and shoals removed by dredging; longitudinal echo-sounding readings normally suffice to locate shallow lengths on artificial canals.
The dredging plant is an expensive item of waterway maintenance. Bucket dredgers for major operations are supplemented by suction, or grab, dredgers for localized work. Hopper barges are required for transporting dredged materials to disposal sites, which should be numerous enough to minimize the transporting period, so that the dredger remains fully operational with a minimum of hopper barges and towage units.
Bank revetment requires special vessels for carrying piling frames and light lifting tackle; other service craft are needed for concrete mixing and general duty.
Lock gate renewal is normally planned to ensure that a predetermined number of gates are replaced annually; special vessels equipped with heavy lifting tackle are needed for transport and site handling.
Divers carry out underwater inspections and repairs. Although scuba-type diving has been developed for some underwater operations, helmet diving is still needed for prolonged work. Both types of diving require special craft with specialized crew and equipment for servicing the divers. Salvage craft equipped with pumps and heavy lifting tackle are used for removing obstructions from the channel or for raising sunken vessels. Tugs handle the service vessels because many are used only intermittently, and thus power units are not economical. Dry docks or slipways, workshops, fitting shops, welding bays, and other special facilities, usually grouped in the vicinity of the administration offices, are part of every modern canal maintenance system.
Christopher Marriage Marsh