The discovery of isotopes
- Related Topics:
- deuterium
- radioactive isotope
- tritium
- tantalum-180
- tantalum-181
- On the Web:
- National Isotope Development Center - Isotope Basics (Nov. 21, 2024)
Evidence for the existence of isotopes emerged from two independent lines of research, the first being the study of radioactivity. By 1910 it had become clear that certain processes associated with radioactivity, discovered some years before by French physicist Henri Becquerel, could transform one element into another. In particular, ores of the radioactive elements uranium and thorium had been found to contain small quantities of several radioactive substances never before observed. These substances were thought to be elements and accordingly received special names. Uranium ores, for example, yielded ionium, and thorium ores gave mesothorium. Painstaking work completed soon afterward revealed, however, that ionium, once mixed with ordinary thorium, could no longer be retrieved by chemical means alone. Similarly, mesothorium was shown to be chemically indistinguishable from radium. As chemists used the criterion of chemical indistinguishability as part of the definition of an element, they were forced to conclude that ionium and mesothorium were not new elements after all, but rather new forms of old ones. Generalizing from these and other data, English chemist Frederick Soddy in 1910 observed that “elements of different atomic weights [now called atomic masses] may possess identical (chemical) properties” and so belong in the same place in the periodic table. With considerable prescience, he extended the scope of his conclusion to include not only radioactive species but stable elements as well. A few years later, Soddy published a comparison of the atomic masses of the stable element lead as measured in ores rich in uranium and thorium, respectively. He expected a difference because uranium and thorium decay into different isotopes of lead. The lead from the uranium-rich ore had an average atomic mass of 206.08 compared to 207.69 for the lead from the thorium-rich ore, thus verifying Soddy’s conclusion.
The unambiguous confirmation of isotopes in stable elements not associated directly with either uranium or thorium followed a few years later with the development of the mass spectrograph (see mass spectrometry) by Francis William Aston. His work grew out of the study of positive rays (sometimes called canal rays), discovered in 1886 by Eugen Goldstein and soon thereafter recognized as beams of positive ions. As a student in the laboratory of J.J. Thomson, Aston had learned that the gaseous element neon produced two positive rays. The ions in the heavier ray had masses about two units, or 10 percent, greater than the ions in the lighter ray. To prove that the lighter neon had a mass very close to 20 and that the heavier ray was indeed neon and not a spurious signal of some kind, Aston had to construct an instrument that was considerably more precise than any other of the time. By 1919 he had done so and convincingly argued for the existence of neon-20 and neon-22. Information from his and other laboratories accumulated rapidly in the ensuing years, and by 1935 the principal isotopes and their relative proportions were known for all but a handful of elements.
Nuclear stability
Isotopes are said to be stable if, when left alone, they show no perceptible tendency to change spontaneously. Under the proper conditions, however, say in a nuclear reactor or particle accelerator or in the interior of a star, even stable isotopes may be transformed, one into another. The ease or difficulty with which these nuclear transformations occur varies considerably and reflects differing degrees of stability in the isotopes. Accordingly, it is important and useful to measure stability in more quantitative terms.
A uniform scale of nuclear stability, one that applies to stable and unstable isotopes alike, is based on a comparison of measured isotope masses with the masses of their constituent electrons, protons, and neutrons. For this purpose, electrons and protons are paired together as hydrogen atoms. The actual masses of all the stable isotopes differ appreciably from the sums of their individual particle masses. For example, the isotope 126C, which has a particularly stable nucleus, has an atomic mass defined to be exactly 12 amu. The total separate masses of 6 electrons and 6 protons (treated as 6 hydrogen atoms) and of 6 neutrons add up to 12.09894 amu. The difference, Δm, between the actual mass of the assembled isotope and the masses of the particles gives a measure of the stability of the isotope: the larger and more negative the value of Δm, the greater the stability of the isotope. The difference in mass is often expressed as energy by using Albert Einstein’s relativity equation in the form E = (Δm)c2. Here, c is the speed of light. The quantity of energy calculated in this way is called the nuclear binding energy (EB).
A single mathematical equation accurately reproduces the nuclear binding energies of more than 1,000 nuclides. It can be written in the form
In this equation N is the number of neutrons in the nucleus. The terms c1 = 15.677, c2 = 18.56, c3 = 0.717, c4 = 1.211, and k = 1.79, while δ may take any of several values (see below). The numerical values of these terms do not come from theory but from a selection process that ensures the best possible agreement with experimental data. On the other hand, theory helps justify, at least qualitatively, the mathematical form of each term. Modeled on an analogy to a liquid drop, the first term represents the favourable contribution to the binding of the nucleus made by short-range, attractive nuclear forces between neutrons and protons. The second term corrects the first by allowing for the expectation that nucleons at the surface of the nucleus, unlike those in the interior, do not experience forces of nuclear attraction equally from all sides. Both the first and second terms have a second empirical component of the form k[(N − Z)/A]2, which is referred to as the symmetry energy. It vanishes (neither helps nor hinders binding) when N is equal to Z (when the nucleus is “symmetric”), but then works increasingly to destabilize the nucleus as N and Z grow apart. The third term symbolizes the coulombic, or electrostatic, energy of repulsion of the protons; its derivation assumes a uniform distribution of charge within the nucleus. The fourth term makes a small correction to the third. This correction is necessitated by the observation that the nuclear charge distribution becomes somewhat more spread out near the surface of the nucleus. The last term, the so-called pairing energy, takes on any one of three values depending on whether N and Z are both even (δ = 11/Square root of√A), their sum is odd (δ = 0), or both are odd (δ = −11/Square root of√A). More-detailed treatments sometimes give other values for δ as well.
The largest observed deviations from the equation occur at certain favoured numbers (magic numbers) of neutrons or protons (2, 8, 20, 28, 50, 82, and 126). Magic nuclei are more stable than the binding energy equation would predict. The isotope of helium with 2 neutrons and 2 protons is said to be doubly magic. The shell nuclear model helps to explain its stability.
Division of the binding energy EB by A, the mass number, yields the binding energy per nucleon. This important quantity reaches a maximum value for nuclei in the vicinity of iron. When two deuterium atoms fuse to form helium, the binding energy per nucleon increases and energy is released. Similarly, when the nucleus of an atom of 235U fissions into two smaller nuclei, the binding energy per nucleon again increases with a concomitant release of energy.
Radioactive isotopes
Only a small fraction of the isotopes are known to be stable indefinitely. All the others disintegrate spontaneously with the release of energy by processes broadly designated as radioactive decay. Each “parent” radioactive isotope eventually decays into one or at most a few stable isotope “daughters” specific to that parent. The radioactive parent tritium (3H, or hydrogen-3), for example, always turns into the daughter helium-3 (3He) by emitting an electron.
Under ordinary conditions, the disintegration of each radioactive isotope proceeds at a well-defined and characteristic rate. Thus, without replenishment, any radioactive isotope will ultimately vanish. Some isotopes, however, decay so slowly that they persist on Earth today even after the passage of more than 4.5 billion years since the last significant injection of freshly synthesized atoms from some nearby star. Examples of such long-lived radioisotopes include potassium-40, rubidium-87, neodymium-144, uranium-235, uranium-238, and thorium-232.
In this context, the widespread occurrence of radioisotopes that decay more rapidly, such as radon-222 and carbon-14, may at first seem puzzling. The explanation of the apparent paradox is that nuclides in this category are continually replenished by specialized nuclear processes: by the slow decay of uranium in the Earth in the case of radon and by the interactions of cosmic rays with the atmosphere in the case of carbon-14. Nuclear testing and the release of material from nuclear reactors also introduce radioactive isotopes into the environment.
Nuclear physicists have expended great effort to create isotopes not detected in nature, partly as a way to test theories of nuclear stability. In 2006 a team of researchers at the Joint Institute for Nuclear Research in Dubna, near Moscow, and at the Lawrence Livermore National Laboratory, in Livermore, California, U.S., announced the creation of oganesson, with 118 protons and 176 neutrons. Like most isotopes of elements heavier than uranium, it is radioactive, decaying in fractions of a second into more-common elements.