Concentration

Optical separation

This process is used for the concentration of particles that have sufficiently different colours (the best contrast being black and white) to be detected by the naked eye. In addition, electro-optic detectors collect data on the responses of minerals when exposed to infrared, visible, and ultraviolet light. The same principle, only using gamma radiation, is called radiometric separation.

Gravity separation

Gravity methods use the difference in the density of minerals as the concentrating agent.

In heavy-media separation (also called sink-and-float separation), the medium used is a suspension in water of a finely ground heavy mineral (such as magnetite or arsenopyrite) or technical product (such as ferrosilicon). Such a suspension can simulate a fluid with a higher density than water. When ground ores are fed into the suspension, the gangue particles, having a lower density, tend to float and are removed as tailings, whereas the particles of valuable minerals, having higher density, sink and are also removed. The magnetite or ferrosilicon can be removed from the tailings by magnetic separation and recycled.

In the process called jigging, a water stream is pulsed, or moved by pistons upward and downward, through the material bed. Under the influence of this oscillating motion, the bed is separated into layers of different densities, the heaviest concentrate forming the lowest layer and the lightest product the highest. Important to this process is a thorough classification of the feed, since particles less than one millimetre in size cannot be separated by jigging.

Finer-grained particles (from 1 millimetre to 50 micrometres) can be effectively separated in a flowing stream of water on horizontal or inclined planes. Most systems employ additional forces—for example, centrifugal force on spirals or impact forces on shaking tables. Spirals consist of a vertical spiral channel with an oval cross section. As the pulp flows from the top to the bottom of the channel, heavier particles concentrate on the inner side of the stream, where they can be removed through special openings. Owing to their low energy costs and simplicity of operation, the use of spirals has increased rapidly. They are especially effective at concentrating heavy mineral sands and gold ores.

Gravity concentration on inclined planes is carried out on shaking tables, which can be smoothed or grooved and which are vibrated back and forth at right angles to the flow of water. As the pulp flows down the incline, the ground material is stratified into heavy and light layers in the water; in addition, under the influence of the vibration, the particles are separated in the impact direction. Shaking tables are often used for concentrating finely grained ores of tin, tungsten, niobium, and tantalum.

Flotation separation

Flotation is the most widely used method for the concentration of fine-grained minerals. It takes advantage of the different physicochemical surface properties of minerals—in particular, their wettability, which can be a natural property or one artificially changed by chemical reagents. By altering the hydrophobic (water-repelling) or hydrophilic (water-attracting) conditions of their surfaces, mineral particles suspended in water can be induced to adhere to air bubbles passing through a flotation cell or to remain in the pulp. The air bubbles pass to the upper surface of the pulp and form a froth, which, together with the attached hydrophobic minerals, can be removed. The tailings, containing the hydrophilic minerals, can be removed from the bottom of the cell.

Flotation makes possible the processing of complex intergrown ores containing copper, lead, zinc, and pyrite into separate concentrates and tailings—an impossible task with gravity, magnetic, or electric separation methods. In the past, these metals were recoverable only with expensive metallurgical processes.

Magnetic separation

Magnetic separation is based on the differing degrees of attraction exerted on various minerals by magnetic fields. Success requires that the feed particles fall within a special size spectrum (0.1 to 1 millimetre). With good results, strongly magnetic minerals such as magnetite, franklinite, and pyrrhotite can be removed from gangue minerals by low-intensity magnetic separators. High-intensity devices can separate oxide iron ores such as limonite and siderite as well as iron-bearing manganese, titanium, and tungsten ores and iron-bearing silicates.

Electrostatic separation

The electrostatic method separates particles of different electrical charges and, when possible, of different sizes. When particles of different polarity are brought into an electrical field, they follow different motion trajectories and can be caught separately. Electrostatic separation is used in all plants that process heavy mineral sands bearing zircon, rutile, and monazite. In addition, the cleaning of special iron ore and cassiterite concentrates as well as the separation of cassiterite-scheelite ores are conducted by electrostatic methods.