After the fall of the Roman Empire, progress in European bridge building slowed considerably until the Renaissance. Fine bridges sporadically appeared, however. Medieval bridges are particularly noted for the ogival, or pointed arch. With the pointed arch the tendency to sag at the crown is less dangerous, and there is less horizontal thrust at the abutments. Medieval bridges served many purposes. Chapels and shops were commonly built on them, and many were fortified with towers and ramparts. Some featured a drawbridge, a medieval innovation. The most famous bridge of that age was Old London Bridge, begun in the late 12th century under the direction of a priest, Peter of Colechurch, and completed in 1209, four years after his death. London Bridge was designed to have 19 pointed arches, each with a 7.2-metre (24-foot) span and resting on piers 6 metres (20 feet) wide. There were obstructions encountered in building the cofferdams, however, so that the arch spans eventually varied from 4.5 to 10.2 metres (15 to 34 feet). The uneven quality of construction resulted in a frequent need for repair, but the bridge held a large jumble of houses and shops and survived more than 600 years before being replaced.
A more elegant bridge of the period was the Saint-Bénézet Bridge at Avignon, France. Begun in 1177, part of it still stands today.
Another medieval bridge of note is Monnow Bridge in Wales, which featured three separate ribs of stone under the arches. Rib construction reduced the quantity of material needed for the rest of the arch and lightened the load on the foundations.
The Renaissance and after
Stone arch bridges
During the Renaissance the Italian architect Andrea Palladio took the principle of the truss, which previously had been used for roof supports, and designed several successful wooden bridges with spans up to 30 metres (100 feet). Longer bridges, however, were still made of stone.
Another Italian designer, Bartolommeo Ammannati, adapted the medieval ogival arch by concealing the angle at the crown and by starting the curves of the arches vertically in their springings from the piers. This elliptical shape of arch, in which the rise-to-span ratio was as low as 1:7, became known as basket-handled and has been adopted widely since. Ammannati’s elegant Santa Trinità Bridge (1569) in Florence, with two elliptical arches, carried pedestrians and later automobiles until it was destroyed during World War II; it was afterward rebuilt with many of the original materials recovered from the riverbed.
Yet another Italian, Antonio da Ponte, designed the Rialto Bridge (1591) in Venice, an ornate arch made of two segments with a span of 27 metres (89 feet) and a rise of 6 metres (21 feet). Antonio overcame the problem of soft, wet soil by having 6,000 timber piles driven straight down under each of the two abutments, upon which the masonry was placed in such a way that the bed joints of the stones were perpendicular to the line of thrust of the arch. This innovation of angling stone or concrete to the line of thrust has been continued into the present.
By the middle of the 18th century, bridge building in masonry reached its zenith. Jean-Rodolphe Perronet, builder of some of the finest bridges of his day, developed very flat arches supported on slender piers. His works included the Pont de Neuilly (1774), over the Seine, the Pont Sainte-Maxence (1785), over the Oise, and the beautiful Pont de la Concorde (1791), also over the Seine. In Great Britain, William Edwards built what many people consider the most beautiful arch bridge in the British Isles—the Pontypridd Bridge (1750), over the Taff in Wales, with a lofty span of 42 metres (140 feet). In London the young Swiss engineer Charles Labelye, entrusted with the building of the first bridge at Westminster, evolved a novel and ingenious method of sinking the foundations, employing huge timber caissons that were filled with masonry after they had been floated into position for each pier. The 12 semicircular arches of portland stone, rising in a graceful camber over the river, set a high standard of engineering and architectural achievement for the next generation and stood for a hundred years.
Also in London, John Rennie, engaged by private enterprise in 1811, built the first Waterloo Bridge, whose level-topped masonry arches were described by the Italian sculptor Antonio Canova as “the noblest bridge in the world.” It was replaced by a modern bridge in 1937–45. Rennie subsequently designed the New London Bridge of multiple masonry arches. Completed in 1831, after Rennie’s death, it was subsequently widened and was finally replaced in the 1960s.